Just for fun-
Only launched this thing twice above 5 psi. This launch was 10psi, I took it to around 3500- 3600rpms in 4th... My buddy filming has a 12.00 GTO and was surprised how hard it gets out of the hole. I usually cut 60ft's in the 1.7's with my car and this thing leaves harder initially... of course my car would quickly run it down and be gone... but still!
I'm going to run it at the track this weekend... last event of the year and I'd like to see what it can do. Only issue is that I'm not letting it shift to 5th under WOT.. so If I can't get there by revving 4th to 4000, I'll have to let off a little and thats going to hurt me some...
Thanks for any comments,
Todd
(Turn volume up! ... oh and there is a little language involved)
http://www.youtube.com/watch?v=0sut8qwuKOs
[YOUTUBE]http://www.youtube.com/watch?v=0sut8qwuKOs[/YOUTUBE]
Only launched this thing twice above 5 psi. This launch was 10psi, I took it to around 3500- 3600rpms in 4th... My buddy filming has a 12.00 GTO and was surprised how hard it gets out of the hole. I usually cut 60ft's in the 1.7's with my car and this thing leaves harder initially... of course my car would quickly run it down and be gone... but still!
I'm going to run it at the track this weekend... last event of the year and I'd like to see what it can do. Only issue is that I'm not letting it shift to 5th under WOT.. so If I can't get there by revving 4th to 4000, I'll have to let off a little and thats going to hurt me some...
Thanks for any comments,
Todd
(Turn volume up! ... oh and there is a little language involved)
http://www.youtube.com/watch?v=0sut8qwuKOs
[YOUTUBE]http://www.youtube.com/watch?v=0sut8qwuKOs[/YOUTUBE]
Last edited: