LMM: Trip to Diesel Addiction, Nc

[VeeAte]

Looks like I may be doing some 1/4 mile testing when my truck is done at Diesel Addiction. Havent really seen any posts about what people are getting from a 4094vvt so this should be interesting to see what its capable of as I'll have plenty of fuel to really push it. Lets hear some hp/ track time guesses and Ill report back what it does along with some videos

Already have:
4094vvt
AirdogII 165
Race plug/Ported Rails


Here's whats going in:

Wicked stage3 cp3
60% exergy lbz injectors
Rdl manifolds/up pipes
Complete egr delete
Suncoast Gmax6/Precision ML
Dustin's Efi tuning

Truck weight:6920lbs
__________________

 

[ChevyDieselLLY]

There was a theard around here somewhere where a guy did some testing on the 4094vvt. If you do a search for it I'm sure it will show up. Its to hard to say tho what ur truck will do. Its pretty heavy. Are you going to use Dustin's slicks? Drop as much weight as you can and good luck. I am going to guess 12.6 @ 107mph

 

[DIESELMAFIAPER.LB7]

I'd say 12.3-12.5 range I ran a 12.68 with my mods before the modded Injection pump an I weighed around 7000lbs to

 

[paint94979]

I ran 12.32 @ 108.8 on a 1.64 60' with street tires and spring clamps with a stock cp3 and stock injectors. I added a Wicked Diesel CP3 and gained 7 mph I bet you see 11.9x with a decent 60' you need to add some sort of traction bars and or shocks. You will have a hell of a time getting it to ET without suspension mods

 

[hondarider552]

Dmaxchris ran 12.1 iirc on 4094 and 40 overs. Remove some weight and it will help some

 

[VeeAte]

I ran 12.32 @ 108.8 on a 1.64 60' with street tires and spring clamps with a stock cp3 and stock injectors. I added a Wicked Diesel CP3 and gained 7 mph I bet you see 11.9x with a decent 60' you need to add some sort of traction bars and or shocks. You will have a hell of a time getting it to ET without suspension mods

Sorry forgot to mention i do have traction bars, if you see in the video the front right tire still gets kinda funky even with my t bars all the way down and tire psi at 37 front/32 back. Im not sure how to stop that but it did a 1.76 60' which is my best to date.

[YOUTUBE]z3sedLvilPo[/YOUTUBE]

 

[paint94979]

Dmaxchris ran 12.1 iirc on 4094 and 40 overs. Remove some weight and it will help some

Lol I pulled my spare, and back seat I picked NOTHING lol still 12.1 @ 115

 

[VeeAte]

I take the gate/spare tire off so it should help a little.

 

[Akdiesel]

Yeah you should definitely be low 12s...with an ADII, 68mm cheetah and built trans...no traction bars just spring clamps and dustin's tuning at the time my truck went 12.73 at 106.7 weighing 7300lbs on street tires lol

 

[McRat]

Lol I pulled my spare, and back seat I picked NOTHING lol still 12.1 @ 115

But didn't you find $2.37 in spare change, and your old Power Ranger action figure when you pulled the seat?

 

[Mike L.]

But didn't you find $2.37 in spare change, and your old Power Ranger action figure when you pulled the seat?

I think he found some guys dirty shorts back there.:rofl:

 

[LBZrcks]

I think he found some guys dirty shorts back there.:rofl:

:roflmao:

 

[McRat]

That's so WRONG!!! :roflmao:

 

[paint94979]

Actually it was a used pickle wrapper

 

[McRat]

Actually it was a used pickle wrapper

You're right, that's not much of a gain.

I think those are single use ...

 

[DIESELMAFIAPER.LB7]

wow i cant wait to hit the track now with some traction bars front end set-up better an a new pump how soon your truck going to be done sounded good in the video

 

[VeeAte]

wow i cant wait to hit the track now with some traction bars front end set-up better an a new pump how soon your truck going to be done sounded good in the video

Thanks! Im leaving next sunday june 5th, should be done june 10th or 11th then we are talkin about going to the track to tune it.

 

[x MadMAX DIESEL]

Sorry forgot to mention i do have traction bars, if you see in the video the front right tire still gets kinda funky even with my t bars all the way down and tire psi at 37 front/32 back. Im not sure how to stop that but it did a 1.76 60' which is my best to date.

[YOUTUBE]z3sedLvilPo[/YOUTUBE]

Your pitmans and Idlers probably have alot of wear, mine were garbage when it launched like that

 

[DaveB]

What do you have done to the front suspension/steering currently?

 

[VeeAte]

What do you have done to the front suspension/steering currently?

Torsion bars all the way down(thats how they stay) ss tie rod sleeves, cognito pitman/idler arm braces.