T-case rebuild parts, where and what?

[Chevy1925]

what all should i be lookin for in the t-case rebuild kit? i need to get parts ordered so i can rebuild her next week. i was lookin on ebay and found this but mainly just looking, ebay parts arent always the best stuff . would all this in here be about what i need? i have not been in one of these cases to know what i need, hence the post :hug:

http://www.ebay.com/sch/i.html?_sacat=0&_kw=263hd+rebuild+kit

i need to find who sells the steel ring pump rub fix too. the MA one is cool but i dont see the need to spend all that cash when the steel full circle ring ive seen before works just as good.

 

[Bonestock]

If I were gonna rebuild the case I would also get the output shaft tail housing bushing. These are pretty common to crap out on these t cases. I think the bushing is around $25 but will save you headache in the end! Merchant also has the bushing. www.merchant-automotive.com. Hopefully some supporting vendors will chime in on a possible kit that would also include the bushing. Good luck:thumb:

 

[THduramax]

Merchant automotive would be your best answer. They carry jus about er thing.:thumb:

 

[rgullett83]

Merchants piece is only a 100 or so, the last steel piece I got from Kennedy was around 50, it may have came down a little bit

Sent from my MK16a using Tapatalk 2

 

[Chevy1925]

damn, yeah prices have changed since i last looked 5 years ago lol. that MA pump fix use to be 150 bucks. now its half that.

 

[Swisstyphoon]

You can get the steel one for $35, but I also went with the Merchant kit.

 

[Chevy1925]

You can get the steel one for $35, but I also went with the Merchant kit.

link? or pm it to me if they are not a vendor

 

[TRUBBS]

That eBay link didn't work.

I'm also in need of rebuilding my t case if anyone has a link or part number to a kit..

 

[02ilduramax]

i also need to rebuild mine

 

[Chevy1925]

Im starting to think i should just yank it out and see whats worn and replace from there. Mechant has a good selection of parts to choose from most places dont have. I ha e a feelin no kit will include whats ccausing my clunk

 

[Hot COCOAL]

The shop that built my trans also rebuilt my t-case, they used a pump rub kit from sonnax. I had never heard of them before, but Dave swears by the sonnax kit, so i said ok to it, i figure the guy builds hundreds of transmissions a year, ill go with his opinion. Nothing was in need of repair in the t-case, so i dont have any parts ideas for ya, sorry.

 

[TRUBBS]

Im starting to think i should just yank it out and see whats worn and replace from there. Mechant has a good selection of parts to choose from most places dont have. I ha e a feelin no kit will include whats ccausing my clunk

You got clunk, I got pop lol

 

[Big Chris]

Merchant sells a rebuilt/remanufactured t case as well.

 

[Chevy1925]

Merchant sells a rebuilt/remanufactured t case as well.

for waaaaaay more than id like to pay right now . id much rather tear into the case myself anyhow. if it aint an automatic trans, i dont have any problems workin on it myself