LLY: Sway Bar Bushings/Endlinks

[lts1ow]

So maybe its me, but I can't find a set that says it fits a 2005 duramax 4x4

This is as close as I can get, and I can't cross that PN anywhere.
https://www.alligatorperformance.co...213g-sway-bar-bushings-endlinks-01-10-duramax

Amazon has this
https://www.amazon.com/Energy-Suspension-3-5213G-Bushing-Silverado/dp/B0018LMSMI

Its Monday, so be kind :roflmao:

 

[Blackmax123]

The ones from alligator performace state they for 2001 up to 2010.

Sent from my SM-G935V using Tapatalk

 

[Blackmax123]

If you fill in the vehicle information on amazon it states they'll fit on a 2005 chevrolet 2500hd.

Sent from my SM-G935V using Tapatalk

 

[lts1ow]

But its listed as a 2wd kit, which is the only reason I have yet to hit ship now

 

[CarolinaHD]

It's all the same.

 

[chrisuns]

3.5213 is what I bought for mine and they fit perfectly, 4x4 as well.

 

[c20elephant]

The ones from alligator performace state they for 2001 up to 2010.

Sent from my SM-G935V using Tapatalk

Provided you have a stock sway bar (1-3/8" hollow bar), won't fit my 1-1/2" aftermarket front and rear sway bars and these trucks are in serious need of a rear sway bar, at least for me they need one...

 

[lts1ow]

Provided you have a stock sway bar (1-3/8" hollow bar), won't fit my 1-1/2" aftermarket front and rear sway bars and these trucks are in serious need of a rear sway bar, at least for me they need one...

Mine is 36mm, which is not 1.375 unless they just are "close enough"?

 

[c20elephant]

Mine is 36mm, which is not 1.375 unless they just are "close enough"?

The OEM from my 2006 the dial caliper shows 1.419 with a little rust and dirt and 1-3/8" is close enough when I use a tape measure on my caliper and 36mm should be fine or close enough... :thumb:



https://www.google.com/?gws_rd=ssl#q=metric+to+inches


https://www.google.com/?gws_rd=ssl#q=inch+to+metric+conversion

 

[lts1ow]

Just to update for others, the kit I posted from amazon fit fine and I think it has helped. Could be in my head, but the OE rubber was all shot to hell