I bought a complete interior to swap into my truck to convert it to leather with heat and power for both seats. Before it was just power driver seat cloth. I swapped the BCM, and as expected, when I key on the security light flashes now. Is there way to reset that or do I need to have a Dealer flash it with similar file that has the features that the truck now has assigned to the VIN?
LBZ: Swapped BCM's, Security Light Flashes
- Thread starter bml2200
- Start date
Do the 30 min key learn procedure
Turn key on then attempt to start let the key fall back to the on position watch the the security light it should flash after 10 mins light will got out then turn key off for 5 seconds after repeat the procedure 2 more times after the last time it should start I just did the same thing to my truck a week ago
Turn key on then attempt to start let the key fall back to the on position watch the the security light it should flash after 10 mins light will got out then turn key off for 5 seconds after repeat the procedure 2 more times after the last time it should start I just did the same thing to my truck a week ago
Same thing works for the ECM, worked on both of my spare ECM's
http://www.duramaxdiesels.com/forum/showpost.php?p=119757&postcount=1
http://www.duramaxdiesels.com/forum/showpost.php?p=25510&postcount=1
http://www.duramaxdiesels.com/forum/showpost.php?p=119757&postcount=1
http://www.duramaxdiesels.com/forum/showpost.php?p=25510&postcount=1