stock 2015 Denali

cdbright

cdbright

JUST RENT IT
Dec 16, 2008
1,010
7
38
43
Salt Lake City, UT
i want to go back to a negative offset on my new to me truck, it sits level but it looks like they just cranked the bars. It came with 20 motos but they are not much of an offset.

i am going to go with NITTO mudds but wondered how negative i can go with the wheels and or how big of a tire you guys have slipped in there?

Not much room left and i assume it will get worse if i go any more negative offset.
 
TLyons90

TLyons90

New member
Apr 22, 2013
1,631
0
0
Greenville, SC
Depends how much you wanna cut/trim/rub. 20x10s with a -18ish offset and 33s should clear pretty decent. Anymore and the above is going to be needed.
 
LBZ

LBZ

Super Moderator
Staff member
Jul 2, 2007
9,903
149
63
46
B.C.
TLyons90 said:
Depends how much you wanna cut/trim/rub. 20x10s with a -18ish offset and 33s should clear pretty decent. Anymore and the above is going to be needed.
Click to expand...
I'd like to see what this size looks like on a levelled 15/16. Thinking of going this size on my levelled truck.
 
NC-smokinlmm

NC-smokinlmm

<<<Future tuna killer
May 29, 2011
5,195
360
83
At Da Beach
Just 4" lift it. I run a metric 34x12r22 with zero rubbing and zero trimming. It's a 65k dollar truck treat it like one...
 
RobsDmax

RobsDmax

Member
Mar 19, 2012
832
1
16
Arthur, Ontario
Friend of mine had 33/12.5/20 Mud Tires on 20x12 -44 offset. Bumper was spaced forward heavily and he did some "modifying" on the rear of the fender also to clear them. Keys cranked all the way.
 
cdbright

cdbright

JUST RENT IT
Dec 16, 2008
1,010
7
38
43
Salt Lake City, UT
i want to lift it like all my others but i want to try to keep a half decent smooth ride as i am on the FAR west side of SLC and the roads out here are shit and i am sick of getting my teeth rattled out, the wife would not even ride in my other truck anymore.

I would love a good 4" lift but what should i go with that will ride smooth? My last 6" with FOX shocks rode like hell but it came from a dealer in CA and the original guy who lifted it never left the pavement so i was not valved right at all, we think it was a CTS or bullet proof lift but couldn't find out for sure. I traded her in before i got the chance to play with the valves in the shocks to see if i could make it better. I KING kit like the dodges run would be nice but not sure what that offers in GM?

I hate how low it is so i agree, LIFt it at least 4" , any recommendations welcome, thanks for the input gentleman !!!!!!!!!
 
NC-smokinlmm

NC-smokinlmm

<<<Future tuna killer
May 29, 2011
5,195
360
83
At Da Beach
I'm running a ready lift stage 4 with fox 2.0, rides like stock with 34's and 22's. I wouldn't have it if it drove bad, my wife actually drives it a lot now bc I have so many vehicles...:rofl:
 
You must log in or register to reply here.
Top Bottom