Step into my Candy Store :)

[SSchmi5519]

Heres an assorment of eye candy, all of the trucks you see here are running traction bars custom fabricated by our
forum's own James@T&B Fabrication (Chevy1925), as well as turbo kits we offer, powdercoating,
some lift kit stuff, customers trucks, etc. I intend to update this post as time goes on. If you are a past customer
and have some candy shots of your setup, we would love to post them here for you!

Send email to: [email protected] with comments/questions.

Enjoy!

http://i5.photobuc
ket.com/albums/y171/sschmi5519/Lift6-1.jpg

 

[SSchmi5519]

And heres a few more

 

[Potthoffdmax]

Nice!!:thumb:

 

[diesel53]

love the bumper one the white truck.... I need one of those

 

[duratothemax]

great pics Steve!! :thumb:

 

[SSchmi5519]

love the bumper one the white truck.... I need one of those

They can be had! Another piece that James made. T&B Fab makes cool stuff!

 

[SSchmi5519]

great pics Steve!! :thumb:

Thanks Ben! I installed one of your lockup boxes the other day, everything is wired really nicely and great set of instructions (not often found) to go with!

 

[Harbin_22]

How much for traction bars? What type of joints do they have? Weld or bolt on?

 

[wsmithduramax]

Very cool:thumb: I like the work you guys have done. Been looking into getting some traction bars too, maybe Santa will bring me some or give me the $$$ for some lol

 

[Jscherbs]

Nice Steve! everythings lookinig good! might have to try me one of them thair tunes....

 

[SSchmi5519]

How much for traction bars? What type of joints do they have? Weld or bolt on?

James can tell you more about the material used. They run 450.00 and have serviceable "Johnny joints" on the front and a grease zerk'd poly bushed rear joint.

They have bracket tabs that are curved to weld onto the rear u-bolt plates and flat ones that weld to the frame as well as grade 8 hardware.


Sent from my iPhone.

 

[Chevy1925]

Thanks Ben! I installed one of your lockup boxes the other day, everything is wired really nicely and great set of instructions (not often found) to go with!

knowing where the BCM is reeeeally helps too oke:

James can tell you more about the material used. They run 450.00 and have serviceable "Johnny joints" on the front and a grease zerk'd poly bushed rear joint.

They have bracket tabs that are curved to weld onto the rear u-bolt plates and flat ones that weld to the frame as well as grade 8 hardware.


Sent from my iPhone.

Pretty much. These are not bolt on, tabs must be welded onto the truck but it keeps the bars tucked up under the truck for you lowered guys and keeps it clean looking. Tubing is all 1.5" chromoly tubing. This keeps flexing to a very low minimum, lighter than running a DOM bar of similar strength, and can be fully serviced by you.

 

[ChevyDieselLLY]

What size twins are those? That white gmc looks really slow

 

[SSchmi5519]

what size twins are those? That white gmc looks really slow

They are S366/S480

 

[ChevyDieselLLY]

They are S366/S480

Probably the best twins out there

 

[jmaz268]

pretty awesome pics duder.....when you want some trees and real enviroments in the background let me know......the LB7 needs some pro photos done....

 

[whitelmmmax]

Probably the best twins out there

Yeap they're good for mid 13 second passes :rofl::hug:

 

[Chevy1925]

Yeap they're good for mid 13 second passes :rofl::hug:

those are Seans twins, they run much faster than that

 

[paint94979]

those are Seans twins, they run much faster than that

Lol... I'm going to feel really bad for Bri Bri if his truck runs 13.00 next time out

 

[Dirtymaxx03]

those are Seans twins, they run much faster than that

yes those are my turbos, go ahead and send them over :angel: