Started some rust proofing and repair

[Nightlb7]

I only got to do from the cab back, I pulled the bed knowing the bed crossmember were starting to look rough but they were worse then I thought, 2 of them had rust holes in them "if I knew this I would have ordered new ones and replaced" so i patched them till spring.


03 2500hd lb7, ccsb, robs trans safe tunes, Airdog 165, profab horn, 4in straight piped, ppe gauges, cognito control arms and braces, banks big head waste gate, batmowheel in the stock IHI. Built trans and engine coming soon

 

[Nightlb7]

That heat shield on the bed holds so much crap in there, I did not put it back on, this is the only place where it had rust holes, I used rustoleum rust convertor then rustoleum undercoating spray and a lot of wire wheel and brush work


03 2500hd lb7, ccsb, robs trans safe tunes, Airdog 165, profab horn, 4in straight piped, ppe gauges, cognito control arms and braces, banks big head waste gate, batmowheel in the stock IHI. Built trans and engine coming soon

 

[A. Stock Lbz]

looks nice. good job:thumb:

 

[Nightlb7]

Thanks, ima do the the front half this spring when I have the cab off


03 2500hd lb7, ccsb, robs trans safe tunes, Airdog 165, profab horn, 4in straight piped, ppe gauges, cognito control arms and braces, banks big head waste gate, batmowheel in the stock IHI. Built trans and engine coming soon