LLY: SOTA Novakane

[Colonel03]

Just wondering if anybody has run the 20x10 Novakanes with just a 3" leveling kit on a 2005 2500HD. Wanting to run 295/55/20s. Wanting to go with the 20x10 -19 for a little extra lip. Afraid I would be disappointed in the lip size on the 20x9s.


Sent from my iPhone using Tapatalk

 

[Toxic]

Depends how much you want to cut, with some minor metal trimming they could be fit on a stock height or slightly lowered truck. One of the most popular sizes is the 305/50/20 on a -19 or -24 wheel, on a lowered truck. I personally run a 20x10 -19 with 305/50s and I'm completely decranked. A 295/55 is just slightly taller, but its also slightly narrower. I don't see it being much harder to fit than a 305/50. A leveling kit I would be looking at a 295/60.

 

[WolfLMM]

20x10 0 offset 285/55 required big fender mod and trimming front bumper. My lb7 is lowered though...

 

[Colonel03]

Thanks guys. All of the sites for these lifts say a 33" tire on a 9" wheel with 5.75" back spacing. I know they have to say that to kept they're asses out of a bind. And front bumper is already trimmed, plus about to order a Move bumper kit anyway


Sent from my iPhone using Tapatalk

 

[Toxic]

The biggest issue is the cab side, you will probably still have to do the big fender mod.

 

[Colonel03]

I figured


Sent from my iPhone using Tapatalk

 

[WVRigrat05]

Anything will fit with a plasma cutter and a welder, or a grinder and a hammer.

 

[clrussell]

Anything will fit with a plasma cutter and a welder, or a grinder and a hammer.

I promise it will. Been there.. I've ran a 20x12 -44 with a 32.5" tall LT tire on a no torsion bolt lowered truck.

 

[WVRigrat05]

Yep, it's my trademark. I said **** it and am gonna put a zone lift in lowered in hopes to save on front end parts and so I can get full use of my four wheel peel. Gonna see how long I can get by without a modified inspection sticker.