Well turbo for the valley finally showed up after sitting 100miles away for 3 days. Didn’t really need more air but didn’t want to put stock stuff back in if it was coming apart again.
I thought I was being smart by not removing exhaust housing but am struggling to get the oil drain gasket to stay in place while I slide center section in.
I’ve tried greasing the gasket, making a thicker gasket that’s easier to move with smaller holes for the bolts and threading them into the gasket slightly but once the center section is in place you can’t move the gasket.
Anyone have any suggestions or should I just pull the exhaust housing? Really don’t want to take the uppipes off again.
View attachment 118046