LMM: ScanGuage II

[Amsoiltek]

Since I went the cheap route and bought the truck with the LT option I didn't get the fancy MPG computer.


Has anyone used one of these?
http://www.scangauge.com/products/

 

[kodiak]

I got a Aeroforce Scangauge.....kind of the same deal, only fits in a round hole. My truck did not come with a Transmission temp gauge....so I use it to monitor temps and MPG. Pretty cool set up, just plugs into the OBD II and you are done!

 

[MMLMM]

The Areoforce Scan gauge will not work in the LMMs at this time. I talked to Todd (AeroForce) and there working on a fix. I belive there working for the LBZs now though. The AeroForce gauge I have is working with the transmission but at this time that is it. I'll post when I get my gauge reflashed and it is working correctly in the LMMs.

 

[LarryJewell]

I've been using them for over a year, recently got it reflashed to the newest upgrade. I use it to read rail pressure, vane position, IAT, ECT, etc........

 

[GGAG]

Larry, is that Scangauge II the same as Amsoiltek refered to?
I have the Scangauge II on my 05 LLY and havn't found the program to display rail presure or vane position. If you are using the same gauge, can you guide me to the source for any additional programs?
I do have an Xgauge programed into it that displays Boost presure.
I've also added an Xgauge program for Horspower and Torque, but only the horspower function works.

 

[MMLMM]

The aeroforce scan gauge is and has been up and running for LMM. This was an old thread never updated.

 

[LarryJewell]

Larry, is that Scangauge II the same as Amsoiltek refered to?
I have the Scangauge II on my 05 LLY and havn't found the program to display rail presure or vane position. If you are using the same gauge, can you guide me to the source for any additional programs?
I do have an Xgauge programed into it that displays Boost presure.
I've also added an Xgauge program for Horspower and Torque, but only the horspower function works.

NO that is a different gauge, I have the Aeroforce Scangauge

 

[duratothemax]

you do know its only like 70 bucks to retrofit the factory DIC controls...

 

[duramaximizer]

I have a WT LMM, what do I have to do to get all of the cool stuff Ben?

 

[LBZrcks]

I have a WT LMM, what do I have to do to get all of the cool stuff Ben?

http://www.gmaccessorieszone.com/Ch...nter/?src=chevrolet&tx_gmshopb2b_pi1[type]=gm

http://www.gmpartsdirect.com/results.cfm?singlepart=1&partnumber=19159438