S475 housing

[b_r_a_d_79]

I have a s475sx3 with the specs of
-Compressor wheel dia: 74.7mm
-Compressor inducer: 100.8mm
-Compressor inlet: 5.0"
-Compressor Outlet: 4.0"
-Turbine wheel inducer: 95.5
-Turbine wheel exducer: 87.9mm
-Turbine A/R: T6 1.32A/R Divided
-Turbine exhaust : 5.0" v-band

My question is can I buy a T4 housing for it to run as a single? If so where is the cheapest place to purchase one? This isn't something I'm looking to do right away but its something I've wanted to try for a long time.
Thanks, Brad

 

[x MadMAX DIESEL]

4 inch compressor outlet?

 

[b_r_a_d_79]

That's the specs copied and pasted from the description I got when I bought it.

 

[05_LLY]

Mark @ Danville can hook ya up on a t4 for that turbine.....it wont really do very well as a dd but will make some power with a lil fuel!!

 

[MarkBroviak]

Mark @ Danville can hook ya up on a t4 for that turbine.....it wont really to very well as a dd but will make some power with a lil fuel!!

Yeap, here is the link to them on my website! Like Caleb said, big turbine for daily driver but will rock out with some fuel!

http://www.danvilleperformance.com/custom-t4-90-1-25a-r-s480-96mm-turbine-housing/

 

[b_r_a_d_79]

Yea the truck isn't driven daily but is driven around some. It's basically just a toy for me since it's paid off and I don't have to rely on it since I have a work truck. What a/r would I have to have?

 

[MarkBroviak]

1.0a/r would be my recommendation for best of both street and performance.

 

[b_r_a_d_79]

Ok thanks a lot mark