I recently bought a 72mm danville turbo along with a bigger pump and sticks.I have Goerend R converter which i believe is 22-2300 stall(i think). just wondering if that converter will pair up with it nicely....or is tuning the biggest factor
Right converter for a 72mm turbo?
- Thread starter TeaBagger2006
- Start date
:spit:
only been 7 years since my stock engine whooped up on him before his lift
[YOUTUBE]vOEpzhUEpWg[/YOUTUBE]
jajajaj:roflmao:
but only one truck lived after that night.
for some reason i thought the converter stall would be too tight for that
but only one truck lived after that night.
for some reason i thought the converter stall would be too tight for that
jajajaj:roflmao:
but only one truck lived after that night.
for some reason i thought the converter stall would be too tight for that
Have you asked Mark?
what "danville 72" is it? mark said he quit selling the stg2R turbos for guys using them as singles as they really shine in a compound/triple setup. there isnt much gain as a single and lag is increased. it may be laggier if it doesnt have all stuff the stg2r's did.
I called..... He said it's perfect. It's the 4094 turbo
This doesn't have the upgraded vanes because of that reason.
This doesn't have the upgraded vanes because of that reason.
Last edited:
maybe, he did make a 72stg2r like the 68. mark made a few variations of the 72 iirc
10-4 buddy, now make sure there are no screw drivers around when the intake gets ready to go back on :roflmao: :hug:
i still dont know how it didnt destroy my turbo when it lodged itself in there.:roflmao:
would of had a 68mm Precision turbo if id gone through with the replacement with one of Trent's kits , when i thought it was toast