Removing Steering column cover

Big Angry

Big Angry

<--My idea of a good time
Sep 3, 2006
406
0
0
South Central Pa
Is it possible to remove the shroud (upper part that covers the ignition switch and has the hazard light button on it)on the steering column on a 2004 without removing the steering wheel/airbag? I have a project in mind, but need to pop that cover to see if it would work. I don't want to remove the wheel, but I do need to get that cover off.
Thanks.
 
Big Angry

Big Angry

<--My idea of a good time
Sep 3, 2006
406
0
0
South Central Pa
Thanks guys.
Henry, that is probably a bit more than I need. I just want to take pieces one and two off, that's it. Looks like a couple screws, pull the tilt lever out, and work the top piece off?
Is there anything else I'm missing? Or is it really that simple? :confused:
 
ripmf666

ripmf666

Active member
Sep 20, 2006
15,123
14
38
47
Wentzville Mo
Big Angry said:
Thanks guys.
Henry, that is probably a bit more than I need. I just want to take pieces one and two off, that's it. Looks like a couple screws, pull the tilt lever out, and work the top piece off?
Is there anything else I'm missing? Or is it really that simple? :confused:
Click to expand...


Ted I figured I would post show you that and you see were everything is, you do not have to take it all apart lol, been awhile but I dont think there is a screw even holding it just pops apart. edit yes 2 screws on bottom.
 
Last edited:
Big Angry

Big Angry

<--My idea of a good time
Sep 3, 2006
406
0
0
South Central Pa
ripmf666 said:
Ted I figured I would post show you that and you see were everything is, you do not have to take it all apart lol, been awhile but I dont think there is a screw even holding it just pops apart.
Click to expand...

Yeah, I realized I didn't have to take it all apart.:hug: I just wanted to make sure that it popped off, and also if there were any tricks to it.
Thanks, I'll play with it tomorrow.
 
You must log in or register to reply here.
Top Bottom