Removing CTS Insight, going back to dsp5

[solidrunner]

Buddy is selling his '01 LB7 and he said I can have his CTS Insight if the dps5 switch works. I believe the truck has Idaho Rob tunes if that makes a difference. Is there anything special I need to do to get the switch to work again? I unplugged the CTS and the switch didn't seem to do anything, I then read that if the CTS is unplugged it defaults to tune 3. I checked the ECM connector, and the switch wires are still hooked up, haven't tested the switch for voltage yet. Thank you in advance for any help.

 

[Awenta]

Needs to be updated in the tune

Sent from my SM-N910V using Tapatalk

 

[solidrunner]

Not the answer I was hoping for, but what I expected.

 

[solidrunner]

Guess that's the excuse I need to buy a CTS 2

 

[IdahoRob]

Just have him call us, we will change the tuning over to DSP. There isn't a charge to do so on our tuning.

 

[solidrunner]

He bought the truck with the tunes already in it, I don't think he has the autocal or V2. I kind of needed an excuse to buy the CTS 2. Thank you for the offer/info. As soon as I do the head gaskets/studs on my LLY, I'll be calling you for tunes.