Recently had new 40% nozzles installed and updated tuning from Rob. Before the nozzles were installed, all stock injectors were between -1 and +1. After finally getting some time and V2 updates loaded. I'm concerned with some of my readings. Why the change? Is this a nozzle problem, tuning or a combination of both.
I couldn't open my saved log, so just type them out. These are min, avg, max numbers.
Cylinder #1 1.09 1.70 2.08
Cylinder #2 4.14 4.48 4.80
Cylinder #3 -4.02 -3.78 -3.45
Cylinder #4 -3.81 -3.66 -3.27
Cylinder #5 2.20 2.62 3.08
Cylinder #6 -2.33 -1.87 -1.45
Cylinder #7 -1.23 -0.91 -0.59
Cylinder #8 0.92 1.33 1.64
I couldn't open my saved log, so just type them out. These are min, avg, max numbers.
Cylinder #1 1.09 1.70 2.08
Cylinder #2 4.14 4.48 4.80
Cylinder #3 -4.02 -3.78 -3.45
Cylinder #4 -3.81 -3.66 -3.27
Cylinder #5 2.20 2.62 3.08
Cylinder #6 -2.33 -1.87 -1.45
Cylinder #7 -1.23 -0.91 -0.59
Cylinder #8 0.92 1.33 1.64