Question on rods...

dmaxfireman

'Can do' kind of guy
Apr 8, 2007
2,329
1
38
CT
Rods....

I hear everybody talking about bending rods lately, now I'm assuming thats connecting rods and not push rods. I also hear that the higher the torque the more likely you are to bend rods.

My questions are...

How much torque does it take to do damage?
And can I do damage with a stock fuel system, stock lbz charger, and efi live?


-Kyle
 

malibu795

misspeelleerr
Apr 28, 2007
8,464
715
113
42
in the buckeye state
lb7/lly rod usually bend ~525-550 mark.

LBZ rods are alittle stronger and bend about the 550-600 range..

normally they bend after dual cp3 are added.
 

dmaxfireman

'Can do' kind of guy
Apr 8, 2007
2,329
1
38
CT
I wondering about torque though

I want to make a tune specifically for the dyno to tune for low end torque instead of horsepower.
 

McRat

Diesel Hotrodder
Aug 2, 2006
11,249
26
38
64
Norco CA
www.mcratracing.com
I believe you are in danger starting at about 1200ftlb. 1500+ ftlb seems to be uniformly lethal.

I have made a 797rwhp + 1090ftlb tune for Casper. I believe it would be safe on stock rods.
 

paint94979

Beer Nazi
Sep 18, 2006
11,715
8
38
37
From what i've gathered horsepower doesn't break parts. In a few weeks ill be in the 600hp range running a tune that keeps torque around 900tq. Of course nothing lives forever
 

Trippin

SoCal Diesel
Aug 10, 2006
663
2
0
98,000 miles and lots and lots of 520hp/1100hp dyno and drag race runs coupled with a couple of 600hp and 1200ftlbs nitrous runs on a stock motor and my LB7 rods are .010-.025 short.
 

mde

fuel injection is my life
Mar 17, 2007
396
0
0
Bucky State
I think with a stock charger, stock fuel system, and EFI Live, you might be able to bent the stock rods also, good luck!!!! :)
 

McRat

Diesel Hotrodder
Aug 2, 2006
11,249
26
38
64
Norco CA
www.mcratracing.com
My thoughts on nitrous is to make sure the shot cannot come on at less than 2500 rpm.

Nitrous adds a lot of torque and advances the effective timing. The first bent rods and cracked pistons showed up on stock trucks running tuning + nitrous.
 

Bako_Dmax

GTO Slayer
Apr 3, 2008
657
0
0
Bako
:DDrugs are fun, some of us need a crutch to hang w/ you fast boost only peeps :cruch:
 
Last edited: