PPE Hot +2 ET Question

[coldLBZ]

Hey everyone, I was just wondering what all of the features were on the PPE Hot +2 ET. PPE's website mentioned data scanning, DTC codes, and trans. relearn. Does it have: EGR on/off on all power levels, gear ratio, tire size, top speed limiter, defuel, rev limiter, dual CP3 tuning on all power levels, non-VVT option on all power levels? Any other fancy features? Thanks.

 

[Mike]

I'm not sure, but you may get some answers if you call Pat.

 

[Kat]

I'm not sure, but you may get some answers if you call Pat.

That would work But, I will also ask Dan to come in here when I talk to him later today :cool2:

 

[Mike]

That would work But, I will also ask Dan to come in here when I talk to him later today :cool2:

Ya, Dan would be good also.

 

[Dan@PPE]

Hey everyone, I was just wondering what all of the features were on the PPE Hot +2 ET. PPE's website mentioned data scanning, DTC codes, and trans. relearn. Does it have: EGR on/off on all power levels, gear ratio, tire size, top speed limiter, defuel, rev limiter, dual CP3 tuning on all power levels, non-VVT option on all power levels? Any other fancy features? Thanks.

You just about got it all covered!

 

[coldLBZ]

I just ordered the Hot+2 ET, and I have a few more questions. Can it be updated online with a 56k dial up connection? If I load a tune, then set it back to stock to get a GM reflash done, will I have to get it updated? My old Bully Dog would have to get updated whenever a reflash was done even if I set the tuner back to stock. Thanks.

 

[Dan@PPE]

Yes your tuner is internet updateable with 56k.

No the only time you will need to update the tuner is when we offer changes to the tune or OS of the handheld.

 

[coldLBZ]

Thanks Dan

 

[coldLBZ]

Is the 90hp tune any harder on the motor in cold weather when warming it up? My high idle is about 1200 RPM or so. Or is it just like stock at that low of an RPM, just idling? Thanks.

 

[custom8726]

Is the 90hp tune any harder on the motor in cold weather when warming it up? My high idle is about 1200 RPM or so. Or is it just like stock at that low of an RPM, just idling? Thanks.

I use my high idle with the PPE on LVL-9 (350) and it seems fine warming up no smoke or weird noises.

 

[redneckbuckeye]

I am getting ready to send my hot+2 in for update to E.T, mainly for the option to turn defuel on and off.

 

[coldLBZ]

Thanks Guys.

 

[8lug]

To use lvl 8-10 I have read you need dual cp3's, do you use stock sticks? I was wondering about using a modded CP3 instead.

 

[wdino73]

The pw is to width for an upgraded injector, use on stock sticks only, I know I just melted a piston with level 10, I didn't know any better, stupid hurts.
LOL