LLY: PPE Crash While tuning

[aggar]

Was trying to load a ppe into a truck and it stopped and said contact PPE. And gave this error code: D7DDFF19A29E61FB?? Any idea. I think the tuner needs updated but I can't get the truck back to stock. It gives this code while trying to put back stock. Any ideas?

 

[aggar]

Need help. Truck is sitting in the shop and will not start or crank.

 

[wes06dmax]

Your gonna have to fix that tuner and return the truck back to stock when you turn the key does everything just go black

 

[aggar]

Yes when i try and turn it over everything goes black. So I'm gonna have to send it off, fet it fixed then return back to stock?

 

[rcr1978]

Try unhooking the batteries for a few and try again, good luck

 

[wdino73]

was u loading it for the 1st time or was u changing the calibrations to another level? on my PPE I had to put it back to stock then load the new calibrations or I got the same message,, Good Luck

 

[wilsonck]

Try unhooking the batteries for a few and try again, good luck

Definately try this. Make sure you remove all fuses. Radio + info, etc

 

[aggar]

Tried the batteries and fuses and no go. Still showing the same code. Truck will not do anything. Thinking it's in the tuner. Wish PPE would chime in but prolly not till tomorrow!

 

[rcr1978]

ur sig sais EFI do you have it? If so load ur stock tune that way.

 

[aggar]

Yes I have EFI. This was a ppe that dad had that he wasn't using. I would have to get another license to do this truck. Would my Stock LBZ tune work in there?

 

[rcr1978]

go to this website and put the vin in, find someones OS with all of the correct segment info or post what you need and I will see if I have one.

http://tis2web.service.gm.com/tis2web

 

[rcr1978]

maybe try reading the tune out of the truck with efi live first it might reset the ecm also.

 

[aggar]

OK Will have to try tomorrow. My V2 is at home. I just had the ppe in the truck from dad's.

 

[ripmf666]

Did you try returning to stock under the tuning or go under the force to stock. I can talk you thru it better on the phone. Call me if you want were just driving along to Maryland.

Talk later
Henry
443-907-4838

 

[ripmf666]

Did you try returning to stock under the tuning or go under the force to stock. I can talk you thru it better on the phone. Call me if you want were just driving along to Maryland.

Talk later
Henry
443-907-4838

 

[S Phinney]

Go to the diagnostics section on the tuner and I think there is the area that will make it go back to stock. This happens with this tuner if you change tunes often.

 

[Hole Shot]

Go to the diagnostics section on the tuner and I think there is the area that will make it go back to stock. This happens with this tuner if you change tunes often.

I wouldnt say that its more than likely that all the fuses were not out and a door was opened during tuning

 

[aggar]

Go to the diagnostics section on the tuner and I think there is the area that will make it go back to stock. This happens with this tuner if you change tunes often.

Tried that. No go.

 

[SteveFord]

Did you get it to the part where it says force to stock? I can't remember how to do it but mine stranded me in my drive way and had to do this back when I had my lbz. Forced it back in and all was good and never another issue. Call Henry or PPE and they should be able to tell you how if you haven't tried that already.