ported fuel fitting

[c_murray7313]

ok folks,

i have the ported fuel fitting for my LLY and i havent found anything as far as instructions go that tell me the easiest way to install it. im gonna try to do the install tomorrow along with the race valved which ive got covered. thanks in advance everyone.


Chris

 

[ripmf666]

If you can do the race valve you have the ported fitting handled lol.Its on the same rail just upfront, long wrenchs help.

 

[Mike]

ok folks,

i have the ported fuel fitting for my LLY and i havent found anything as far as instructions go that tell me the easiest way to install it. im gonna try to do the install tomorrow along with the race valved which ive got covered. thanks in advance everyone.


Chris

When we put larry's cheetum on, we went ahead and installed his ported fitting. It was a breeze. I did find that moving the engine wiring harness back and removing a bolt from that wiring connection bracket allowed me to slip the wrench in behind his radiator hose pipe. Using a 12 point " i think 7/8" " boxed end wrench I was able to break it lose to a point of removing the fitting by hand. Larry loosened the fuel line at the cp3 mount and pivoted the line back out of the way once the fuel line nut was removed from the ported fitting at the left front rail. The A/C compressor will have to be removed for an easy installation. Just lay the compressor back out of the way and your set to go. Hope this helps a bit.

 

[c_murray7313]

thanks guys. when im done with the install do i have to pump the air out of the lines via the little hand pump on top of the fuel filter or do i have to do something different? sorry for the questions but just want to have all my ducks in a row. before i tear into this thing. thanks again.

Chris