This is kicking my butt. I have pulled the entire harness apart looking for shorts or abrasions. I have also used the DVOM to check each wire from the connectors to the TCM. I pulled the VB over the weekend and checked the internal harness and the solenoids. I had a spare VB laying around and ran the same tests on it with the same results. I even went through the entire checklist in the ATSG with the DVOM. I can't find anything wrong. Is it possible that I have a bad TCM? I bought a new one so I can keep trouble shooting. I'm still waiting for a new flash so I can re-load the TCM I have just to make sure.