P0700 Limped Trans

TROJAN366

Gold Rush
Jan 13, 2012
2,474
1
38
MASS
After the past 30k or so miles of abuse my tranny has finally had enough. Currently have an Ati triple disc converter, trans go and alto clutches. Held up perfectly in the 550-600hp range. I guess it didn't like the 72 and spray. Few funky shifts at the track but it felt ok afterwards. A week later and it started slipping the 1-2 shift. Today on the way home it flared every shift even on the smallest tune and ended up stuck in 3rd. Going to drain it and check the filter but I'm assuming it is time to see George.
 

SteveLBZ06

New member
Jan 6, 2013
200
0
0
Central MA
pay to play i guess, i wish i could convince myself i should drop 5k into my tranny to have fun but by the looks of your numbers your past that haha. do it up!
 

Evan@InglewoodTrans

yerp
Vendor/Sponsor
Aug 5, 2010
3,118
65
48
40
Western MA
After the past 30k or so miles of abuse my tranny has finally had enough. Currently have an Ati triple disc converter, trans go and alto clutches. Held up perfectly in the 550-600hp range. I guess it didn't like the 72 and spray. Few funky shifts at the track but it felt ok afterwards. A week later and it started slipping the 1-2 shift. Today on the way home it flared every shift even on the smallest tune and ended up stuck in 3rd. Going to drain it and check the filter but I'm assuming it is time to see George.

Atleast you got 30k out of it. While there are ways to make them hold for a bit if your going to pound on it a lot with big power refreshes are a fact of life.
 

GMC_2002_Dmax

The Still Master
My Big Dipper Built trans in my 2002 with a ATS Co-Pilot saw 5 bottles and 30 passes on juice at well over 700 RWHP and never limped once, I bet that trans he built has over 500 passes on it not counting all the boosted launches it saw testing on the street.

Take it there and you won't be disappointed.

Or Freedom Diesel in MA is closer.

:thumb:
 
Last edited:

TROJAN366

Gold Rush
Jan 13, 2012
2,474
1
38
MASS
Andrew mentioned that freedom was building some stout trannies. Just need to weigh my options at this point.
 

TROJAN366

Gold Rush
Jan 13, 2012
2,474
1
38
MASS
What am I looking at for a parts list. It's been built once already. Don't want to need it a third time.