Sled Pull Classes and Rules: $1000.00 Payout
(Please read the Exhaust* paragraph carefully)
True Work Stock: OVER 8000 lbs. twins permitted up to 2.8 on primary charger. Single charger up to 2.8 .
Work Stock: Stock appearing turbochargers, 1" minimum compression travel on rear suspension, water injection prohibited,, hanging weights prohibited.
2.6 Street Diesel: Single turbo, 2.6 inch maximum inducer bore, turbocharger bushings prohibited, water injection prohibited, bolt in removable solid rear suspension bars permitted, receiver style hitch required, hanging weights permitted.
2.8 Street Diesel: Single turbo, 2.8 inch maximum inducer bore, turbocharger bushings permitted, water injection prohibited, bolt in removable solid rear suspension bars permitted, receiver style hitch required, drive shaft u-joint shields required, hanging weights permitted.
Super Street Diesel: Unlimited Single Turbos, 3.2-inch max turbo in twin configuration permitted, open driveline permitted, DOT tires required.
Street Legal Semis: Road ready, street licensed semis.
*Exhaust:If the muffler or catalytic converter have been changed from stock, two 3/8 in. diameter bolts must be installed through the exhaust pipe in a cross pattern within one inch of each other as close to the turbo as is practical.
(It is not necessary to have a stack or turn up pipe to compete)
