This past winter my good friend Garrett built his motor using Crowers, cam, pistons, ARP studs, Balanced, dual ATS cp3 pumps, II 100% over injectors and a Aurora 5000 turbo. He needed more air so this is what he came up with! All the 4" piping was built and welded here on site by Garrett and Eric. Eric CNC machined the T6 Flange that also acts as a bracket to hold up the 85lb turbo and he also built some needed fittings. My buddy Zach built the steel braided feed and drain lines. The truck has been started and all were waiting on is the 6x5.5 45* pipe so Garrett can mount the MAF. Here are some pics, its not quite finished and eventualy all the piping will get powder coated when we get the truck dialed in and we know its good to go! Were still waiting on a few parts including the 50mm wastegate which will all go on later this week. Were hoping to have it at the ATS truck fest diesel drags and dyno Aug 6th. Garretts old best was 708hp on #2 with Meth injection.
