Looking for pictures of stock height trucks with rims. Thinking about loosing the extra springs, leveling kit, 35's, and H2's. Going to stock height and unsure of what i want for rim tire combination. Post up some pics and help me out:hug:
Need truck pictures
- Thread starter 03 D-max
- Start date
Here's mine with 285s on 16x8 w/ 4.25" BS and 18x9.5 w/ almost 6" BS. Also with some 265s on 16x8 with 4.5" BS. My torsion bars are at factory settings. Just trimmed valance and ziptied the wheel well liner back in places.
285/75R16 on 16x8" wheels w/ 4.25" Backspace
285/65R18 on 18x9.5 wheels w/ ~6" backspace
265/75R16 on 16x8" wheels with 4.5" backspace
285/75R16 on 16x8" wheels w/ 4.25" Backspace
285/65R18 on 18x9.5 wheels w/ ~6" backspace
265/75R16 on 16x8" wheels with 4.5" backspace
Attachments
Last edited:
Here is my 04. Tbars are cranked o level. Wheels are 16x8 Pro Comp 6001 with Cooper Discover STTs 285's.
1st 2 are 33/12.50 on 20x10. 3rd is 285/75-16 on 16x10. torsion bars all up with longer shocks and 2" lower in rear
Attachments
Last edited:
285/60/18 18 x 9 ultra grinders 1 turn up on bars, my truck sits lower than most for some reason and a little trimming on the bumper
Attachments
Last edited:
No they come from Boulder Accessories. They were $400 plus shipping for 4. 17x8.5 (I think 8.5). I like them and they bolt right up. You have to trim the center caps some for them to fit.
how much were the wheels? can you get them in 8bolt 20's? what are the offset backspacing specs?
Here ya go:
http://incubusalloys.com/rwd_IA_501_poltergeist8.htm
:hug:
Edit: I got my 22's for under a grand shipped off of some online website. Don't remember what it was though, sorry.
Last edited:
And I thought my 20's were big enough. May have to break out the checkbook again when these tires wear out
