need some help PLEASE!!!

[crazycrew]

Brought my truck in to get flashed last week!! Everything fine!! Got home and my PPE (new to me) was there. So, In a hurry I unplugged the boost stick and replugged the stock. I new the PPE made boost, thats why i unplugged it.

Programmed w/ PPE (lvl 3). NO POWER, PLenty smoke. reprogrammed to stock.

Brought back to dealer. Flashed again, Bad MAP sensor. I bought a new one and changed it out. Upon inspection, it looks like in my rush to take out the boost stick i bent the middle tab on the MAP sensor. I also found the glow plug controller wire to be not completely plugged in, Fixed that

OK, Now, It's completely stock, with a fresh MAP sensor and it still smokes too much for a stock truck and I keep getting 2 codes

P0234 : Turbo overboost
P0237 : Sensor A circuit low

Sorry So Long

Please help

 

[crazycrew]

Checked for boost leaks, Couldnt find any. Cleared the codes w/ my PPE. I keep getting the P0234 Overboost code, but it feels like its not making enuff boost and still smoke a good bit. Also, when on the right pedal a fair amount, right before shifting, it makes kind of a poof, poof sound. Almost like a choo choo train and puffs a little white smoke, mixed in with the black

 

[05lly2500hd]

boost thingy plugged in? how bad did you booger up the connector?

 

[crazycrew]

It now has a new MAP sensor in it! The first one was real booggered up!!

took it back to the dealer today. He did a turbo relearn w/ the T2. Said that shoudl do it. Still not right. Guess I'll have to leave it w/ them a few days to get it right for me!!