Need Copy of LBZ stock tune
- Thread starter bmr7c
- Start date
Looking for one as well unless there is a way to fix the check sum from having a edge tune in the ECU and no way to return it to stock.
EfiLive may not be able to fix the areas of the tune that the edge modified. Often you have to do a full flash with a tech2 or take it to the dealership to have them do it. If you have the EfiLive license for your vehicle then it's worth a try
I think I can flash over what's there with a clean tune, I was trying to license the ecu and just update the existing tune for the egr.
What I mean is the edge will modify some areas of the tune that EfiLive doesn't. So even a full flash with EfiLive may not restore the modified edge bits. EfiLive's "full" flash is not technically a full flash as a tech2 would do. That is the reason EfiLive can't flash in a new module. So if you are wanting to correct the checksum then you are probably going to have to use a tech2 or MDI
Well the fun has begun my check sum issue I guess was a from a lose obd2 port, got that sorted out and it seem to be staying connected. When to flash in the new tune and no tune made it to the ecu. Finally got the vin info back, but now getting p0602, controller not programmed. Not sure if I have harness issues, so I guess I am going to looking into making a bench harness. Not a great way to end the day.
Push come to shove you can send it my way and I can bench it. I have a bench force and harnesses for 01-23 GM.
Efi live will not flash back in the tune I pulled out but I found one that's supposed to be from a new ecu that I used to get the ecu to register properly, but am stuck with the p0602 code and no crank. Just my luck its just the OS. Would appreciate if anyone has a good know stock tune for a 2007 2500.
See here for stock tunes
www.duramaxdiesels.com
Need Factory or low power LBZ tune!!!
Hey guys and gals, I've done an LBZ swap into an 80 series Landcruiser over here in New Zealand. I am trying to get it going with EFI live but I'm having issues getting any tunes. The ecm came with an efi live tune that I couldn't modify so I'm trying to find a safe tune to get the thing...
www.duramaxdiesels.com
Message me your vin. I’ll check my tune library against what TIS2WEB says your VIN should have.
I have a pretty large list of stock files over the years.
You have to go to AC Delco technical delivery system and create an account. Once you log in, under resources select SPS Calibration Information.
Put in a Vin and it will give you the calibration info you are looking for.
Last edited:
Oh, I'll have to check that out. I have a TDS account. Sucks that they hid it behind a login wall now though
That ended up working to get the truck back up and running. Thank youSee here for stock tunes
Need Factory or low power LBZ tune!!!
Hey guys and gals, I've done an LBZ swap into an 80 series Landcruiser over here in New Zealand. I am trying to get it going with EFI live but I'm having issues getting any tunes. The ecm came with an efi live tune that I couldn't modify so I'm trying to find a safe tune to get the thing...
Unfortunately with the hacking and all the other Political BS these days, They just want to know who is accessing the data.Oh, I'll have to check that out. I have a TDS account. Sucks that they hid it behind a login wall now though