Motor build

[1slomax]

well bent a rod the other night so its time for a build just trying to figure out what all im gona need because i have no clue when it comes to building the motor, the trucks a dailydriver not really worried about a hp number but would like to run 10s- low 11s and run low 12s on a small tune, any help would be appreciated thanks

 

[emiller3]

Rods, cut and maybe coat your pistons, balancing,key cam and crank,studs,and valve springs should he a good start.

 

[ChevyDieselLLY]

Rods, cut and maybe coat your pistons, balancing,key cam and crank,studs,and valve springs should he a good start.

X2

set a budget and stay with it

 

[TeaBagger2006]

Use the search feauture and you will find thousands of threads on this subject....

 

[1slomax]

thanks, are the lly pistons the same as lb7?

 

[emiller3]

Yes

 

[smkndmax05]

How much power were you at when it went?

 

[Burn Down]

thanks, are the lly pistons the same as lb7?

04.5'-05' LLY yes, 06' LLY are the same as the LBZ.