EFILive more than normal defuel on shifts

[landers11889]

This is a tune I have been working on and with other people a lot but havent been able to get my defuels perfect. I want defueling on shifts but still defuels more than I am used to. I am running a stock tranny tune. I went from no defuel to defuel but it defuels too much atleast more than I am used to I know my trucks not stock but a stock truck doesnt have this much defuel that I remember.

I attached the tune any help or pointers would be greatly appreciated.

 

[Mike_S]

My suggestion for you would be start a new tune, and leave the fueling down below 3/4 throttle alone. You won't have to spend months working on the torque tables to get a proper shift this way, and the trans will be alot happier. Furthermore, not adding alot of fuel in higher gears and lower RPM is easier on turbos and helps prevent surge. Just my .02 though.

 

[landers11889]

starting a new tune is not an option for me I like this tune too much.

 

[Mike_S]

then your other option is ALOT of loging and tweaking. There is no other method that I know of other than that.

On edit: You could try simply re-scaling your throttle based injection quantity tables back to stock except for 80% TPS and above. Beyond that your other option is lots of tweaking and trying.

 

[landers11889]

Ya I dont understand EFI live enough to log and then look and see somethign and know what happened then tweak for it. This stuff is complicated haha I just don't know exactly what to slowly change cause I know you cant just change one thing you gotta change other things with it.