LBZ: mods on 06

[Dennon2009]

I ordered egr blocker plate, pcv reroute, gauges and pod, and exhaust(turbo back), how hard is all this to put on? and how much time am i looking at.. no experience with any of this.

any tips or help would be of great help.. thank you

 

[Pony Express]

none of that is too complicated. there should be a DIY thread for almost every one of those mods. However with the EGR blocker plate you're going to need some sort of software to install with it (efi live/ tuner) or it'll throw a code.

 

[Dragonsfireloki]

Find a product called PB blaster, its like WD40 but better IMO and soak those bolts for the blocker plate and let it sit a while. Mine were a f***** to get off. For peace of mind, when i did my pyro probe and boost pressure, i removed both pieces, then drilled and tapped them to ensure no metal shavings got anywhere but on the shop floor.

 

[LWATSON]

I ordered egr blocker plate, pcv reroute, gauges and pod, and exhaust(turbo back), how hard is all this to put on? and how much time am i looking at.. no experience with any of this.

any tips or help would be of great help.. thank you

You could easily install all of the above in a day. EGR blocker 30 min., PVC reroute probably about an hour, guages and pod will take the longest, probably two or three hours taking your time and the exhaust, depends on you. Ive done several and can do one in an hour. My first took about two.