Modifyed Fuel Pressure Regulator

[LBZ]

Who sells them? Couldn't find one when I did a Google search. Except industrial and I won't run their stuff.

I bought a wicked diesels one years ago but never used it. It went on Abby before I got a chance to lol.

 

[LBZ]

Anyone?

 

[LBZ]

So I guess you can't buy modified regulators anymore?

 

[LBZ]

Just found this one. Not sure how reputable these cats are.

http://www.confederatediesel.com/lb7-modified-fuel-pressure-regulator-clone.html#/product/287

 

[TheBac]

Other than Superdiesel, (where did Mike go, anyway?) I have no idea who offered them.

 

[Burn Down]

I built my own. It wasn't to hard I followed the thread on Diesel Bombers.
http://www.dieselbombers.com/chevrolet-gmc-diesel-tech-articles/5453-cp3-modifications-you-can-do-yourself.html

 

[LBZ]

Wicked Diesel used to sell them. Not sure if they are around still or not.

 

[LBZ]

I built my own. It wasn't to hard I followed the thread on Diesel Bombers.
http://www.dieselbombers.com/chevro...53-cp3-modifications-you-can-do-yourself.html

Too bad all their pics are gone.

 

[unionmax481]

It's motorsports diesel now he still has a website but good luck trying to get a hold of him I've left him a few messages through email and voicemail never got a return back

 

[clrussell]

I know of a guy who mods regulators.. But they are a bitch to tune

 

[skintback]

You can mod one yourself with a dremel/kit but like said already can be difficult to tune.

enlarge the end cap and cut a line at the bottom/large portion of the triangle on the slide/barrel also remember how deep the end cap was in before removing it

 

[Chevy1925]

I know of a guy who mods regulators.. But they are a bitch to tune

I was gunna say, they are a pain to tune in. Hard to control a flood gate when you can slowly adjust 80% of it and the last 20% goes wide open.

Are you trying to increase rail pressure dale?

 

[LBZ]

No. Replace the one that's stuck in my modded Danville pump.

 

[Chevy1925]

No. Replace the one that's stuck in my modded Danville pump.

I don't think Mark mods them, does he? If so, I don't see why you couldn't get one from him

 

[LBZ]

Apparently they do mod them. I'm betting it's the only thing they do to them actually.

I think his wife or someone else family emailed me back about it and said if I replace with stock it will flow less and to send it to them to test it.

 

[Chevy1925]

Can they not just send you another modded one?

 

[LBZ]

I dunno. It's like pulling teeth there sometimes trying to get info. I email a question and get a one sentence reply with no other options or anything. Hence why I hate dealing with front counter phone answerer's. Unless your calling Inglewood transmission. The guy that answers the phone there is pretty decent.

I wish Mark was a little more accessible! He's great to deal with. Impossible to get ahold of though.

 

[Burn Down]

Hmm, my modded reg. has never given me any issues tuning it.

 

[clrussell]

I dunno. It's like pulling teeth there sometimes trying to get info. I email a question and get a one sentence reply with no other options or anything. Hence why I hate dealing with front counter phone answerer's. Unless your calling Inglewood transmission. The guy that answers the phone there is pretty decent.

I wish Mark was a little more accessible! He's great to deal with. Impossible to get ahold of though.

Hmmm.. Mark is always pretty easy to get ahold of for me.. Emailed him about a tube update Friday and got one back a couple hours later after they closed!

 

[skintback]

Just take the guts out of it end cap spring barrel and put your lift pump on a switch