lowered truck rancho 9000?s

[zf>allison]

Ok I've done some reading and it seems I have gotten alot of part numbers including stock length shocks, which may be fine but that's another question. Are stock length shocks fine for a 3 inch drop truck slammed t bars without prematurely wearing them out? I want something I don't have to modify to bad busching wise or bolt size. And I don't want them.to bottom out. So does anyone have a number or at least a length and bolt hole diameter I should be looking for?

 

[hondarider552]

Stock length shocks in rear with only a 3" shackle will be just fine.

 

[zf>allison]

Sweet thanks

 

[Hernpj01]

you looking at the rs9000xl for front and rear?

 

[zf>allison]

That's what i was gonna do. I know alot of guys racing use em. Got to be better than 4 blown stock shocks. I have a really bad lifting problem off the line. I can cut a 1.8 60ft. I think shocks would help alot.

 

[Hernpj01]

i think so, plus you have full adjustment with the 9000 series i have bilsteins now think im going to swap them out for some ranchos first of the year. Looks like i will just order for stock height(front and rear) im -2 in rear.

 

[zf>allison]

I'll do the same

 

[OregonDMAX]

I found 2" lower ranchos on amazon, I had to play with part #'s and the "will this fit your vehicle" nonsense but I got what I wanted.

 

[The Neens]

Go to the Rancho website and find out the stock length and upper/lower mounting types for your truck...Then look in the catalog for the shorter length that will work for you...

http://www.gorancho.com/

 

[zf>allison]

Stock lengths are 362 for all 4 on amazon free Shipping.

 

[OregonDMAX]

RS999029 and RS999113 for 2" lower front an rear.

the rears either have to have different bushing metal bolt sleeves put in or run without the sleeves because the ones it comes with don't work. I'm assuming the reaos are for a NBS but I don't care I just went with no bushing metal bolt sleeves and they are fine. The bushings just might wear a little faster

 

[zf>allison]

RS999029 and RS999113 for 2" lower front an rear.

the rears either have to have different bushing metal bolt sleeves put in or run without the sleeves because the ones it comes with don't work. I'm assuming the reaos are for a NBS but I don't care I just went with no bushing metal bolt sleeves and they are fine. The bushings just might wear a little faster

where did u pick those up?

^^oh amazon^^

 

[OregonDMAX]

where did u pick those up?

^^oh amazon^^

I waited until the rancho rebate month i think its march? And got $100 back after spending about 340 on amazon

 

[zf>allison]

Man March is a Long way away

 

[smkndmax05]

Stock height rancho 9000s all around.


Sent from my iPhone using Tapatalk

 

[zf>allison]

That settles that