logging question

[tinman22]

okI have been trying to get the main injection pulse table to read something than from the 190mpa column. trippin reccommended logging in metric. I Have tried to open the lbz metric pids but my dash board still shows things in imerial ie mph as opposed to kph etc. its making it impossible to adjust the timing of injection amounts. anyone know what I might be doing wrong? all the other tables seem to move fine when i'm viewing a log in the tuning tool. theres some other wierd issues that I think I should ask efi about. when I start the tuning tool it automatically goes to the out of range tab instead of the calibration tab. and when I want to connect my scan tool it automatically goes to the 4 or 5 speed trans ( t42) doesnt seem to retain my last used request. any ideas would be appreciated

 

[sweetdiesel]

when you are trying to log main pulse it jst links to 190? is thaat what you are saying
i dont have much experiance with the lbz but on the lly/lb7 we need to log main inj fuel 2 and that is a DMA meaning its calculated

is this a older version of EFI or have you changed the pids?from default

there is also cal link files that can be adjusted but i dont have any for the lbz
try talking to some of the lbz guys on here for there PIDS files

 

[tinman22]

yes it just links to 190. but will move up and down the column. I dont know aobut lly. but the lb7 tables are completely different for me lol i'm running V7.4 I just didnt DL the last update with the newer beta with the updated alli software

 

[sweetdiesel]

to me it sounds like you have a problom with the cal link file
lly and lb7 are the same for logging for the most part

i would maybee try downloading the files again

 

[tinman22]

maybe. I think the last DL was a patch. I know its nto completely right cause I didnt get the images placed right. like the alli 6 speed tcm pic doesnt work.