lmm timing multiplier

[jwrkansas]

Anyone have any tips for adjusting multipliers for cold weather? Tons of tables! Been looking at aat modifiers. B0989 is one I've been thinking of trying first.

 

[Harbin_22]

What is the reason for cold timing?

 

[DAVe3283]

At least on my LB7 with 60 over sticks, I'm starting to question if there is a reason for different cold timing.

Its down to 40F in the mornings now, and it runs better with the cold timing set the same as normal timing. Don't know if that's because of my setup, or if it just isn't cold enough yet.

Sent from my Galaxy Nexus using Tapatalk 2

 

[jwrkansas]

It runs great but has a lot of clatter on cold starts running about 10 degrees from around 12-1500 rpm. Heard of a few people adjusting their multipliers to calm down the noise some

 

[SSchmi5519]

At least on my LB7 with 60 over sticks, I'm starting to question if there is a reason for different cold timing.

Its down to 40F in the mornings now, and it runs better with the cold timing set the same as normal timing. Don't know if that's because of my setup, or if it just isn't cold enough yet.

Sent from my Galaxy Nexus using Tapatalk 2

Colder. I've never had problems cold starting anything under 100%'ers. Problems at ~30*-35*F.

 

[SSchmi5519]

Or higher elevation. 6000+feet


Sent from my iPhone.

 

[DIESELMAFIAPER.LB7]

Colder. I've never had problems cold starting anything under 100%'ers. Problems at ~30*-35*F.

I start having issues around 38*, below zero forget it if its not plugged in not sure if i have a bad tip or i messed the tune up somewhere never have time to screw with it