LMM: lmm mirror wiring

[OregonDMAX]

Looking for some info on lmm mirror wiring, either a schematic or something to show what wires do what function. I have a see of mirros that are power and heated and that's it. The 5 wires I have on the mirror side are orange, white, grey w/black tracer and 2 black wires.

What I'm looking for is any info leading towards what wore does what function, I cannot get them to function by adding power to eachwire I think one wire is a power wire to the mirror maybe?

The only thing I know is the orange is most likely for the heater

The connector view shows wires pinned at 3,4,5,9,10

Connector view is top left to right 1-5 then 6-10 is bottom left-right

Black wire at conncctor pin slot 3,9 grey at 4, orange at 5 and white at 10

I'm sure this is muchsimplet then I am making it but wiring schematics and principles is my weak link. Thanks for any help

 

[clrussell]

They don't match your description so I don't think they will help

 

[OregonDMAX]

The schematic doesn't show up or left so. Maybe those functions are based off the down and right wires with a different power feed?

My wire colors and pin locations are totally different though so that's weird

 

[clrussell]

That schematic is the same as 07-12 half ton and 3/4..

I'm willing to bet that the polarity Is reversed in the newer trucks to make the mirror move the opposite direction

 

[OregonDMAX]

Sent you a pm thinking I was reply in here oops. Curious what an 02 looks like I'd its the same kind of reverse polarity like the 07 I need to know if they both have a dedicated ground.

 

[clrussell]

02 schematic

 

[OregonDMAX]

Thanks so much for the info. This helps a ton!

 

[clrussell]

No prob! Drink one for me later

 

[OregonDMAX]

What's weird is both connectors have 5 pins but the lmm mirror has 2 ground wires. Which leaves me with a wire on the 02 body side that doesn't have a place, shit I hate wiring

 

[OregonDMAX]

A-7
D-1
E-2
H-3,10
So is C-6 ?? My best guess...


Should mention the lmm mirrors are aftermarket brand and not factory. I might have to call the maker and see wtf they did with these connectors the colors don't match obviously and that's what's screwing me up

Edit: Orange is a power wire apparently. I'm starting to think I can't do this at all

 

[clrussell]

I'm thinking your not going to be able to make it work.. other than maybe the heated mirror

 

[OregonDMAX]

If all I can get working is the heater part I'm fine, I never adjust my mirrors anyway but I gotta have the heat part we get freezing fog all the time here. It got dark before I could finish I'll wire up the heater part, bit it might be a few days before I know if it's working.

 

[clrussell]

Just hook up orange to the heater and a ground wire.

I loved my heated mirrors in my lbz.. My reg cab has no wires to the mirrors