LMM Input Speed sensor install

[Psini]

G'day,
I made a bit of a balls up and bought an LMM Allison as a rebuilder/spare for my LBZ setup.
Is it possible to drill a hole in the bellhousing and install the input speed sensor, or will I need the lbz bellhousing?
Haven't pulled the converter out of it yet so don't even know if the converter has the dimples in the cover for the sensor, hoping they didn't change that bit aswell.
Anyone converted one before?
Cheers

 

[Mike L.]

Hit and miss. I wouldn't try it as there is .045 reading distance for a good signal.

 

[Psini]

Hit and miss. I wouldn't try it as there is .045 reading distance for a good signal.

Thanks for the reply Mike,
Will the LBZ bell housing bolt straight on. Might just swap it over when I change them out after build.

 

[Mike L.]

LBZ will bolt right up.

 

[Psini]

Cheers Mike