LMM DSP5 tune once over

[Jamie F]

Hello,
just made my first DSP5 tune and wondering if anyone who has done a few of these wants to take a look and see if im out of line or if it would be a good starting point?

send me your email and ill send you the tune to look over, id appreciate the feed back on it

 

[Jamie F]

just figured out how to add the tune file onto here.

***WARNING not sure if this tune is safe for a stock trans, or safe at all!***

These are what I was aiming for:

base tune/switch position 1 is as good as stock

#2 is a stock tune with modified timing

#3 is a light tow tune (lighter loads with turbo brake)

#4 is a heavy tow tune (heavier loads with turbo brake)

#5 is a street tune

I did the fuel pressure setup like he was talking about in the last post here:

LMM rail pressure issue

Has anyone ever had an issue getting an LMM to command more than 180 MPa rail pressure? I have set the cal to 200, and the commanded rail pressure will never go above 180.

forum.efilive.com

i would appreciate any feedback from anyone familiar with these tunes