Anyone happen to know the crank position sensor voltage on an lly? Mines throwing a cam/crank sensor corralation code and I replaced both sensors and traced the wires. My crank sensor is reading 5 amps and the cam position sensor reads 11.5-12amp. Which I would think the crank sensor should be too but trying to find someone who knows?
LLY: LLY cam/crank corralation
- Thread starter Duramax2822
- Start date
Before you do anything else check to make sure the reluctor Wheel on the crank is tight.
You will need to remove the crank sensor,then use a flat screwdriver or similar tool to reach in and try to rotate the wheel either direction. It shouldn't move.
Sent from my SM-N920V using Tapatalk
You will need to remove the crank sensor,then use a flat screwdriver or similar tool to reach in and try to rotate the wheel either direction. It shouldn't move.
Sent from my SM-N920V using Tapatalk