LLY: Light wheels for the strip

[quinton]

Was wondering what some of you guys are running for wheels on the drag strip. What offset and what is the weight of them? Pics would be nice too if like black. I tried looking through here but couldn't find a thread on wheels, I know there's one here somewhere. With my current setup I can't cut anything better than a 1.78 60' with my hoss xd 20's -12 offset and 305/40 nitto 420's.

 

[IOWA LLY]

I'm curious to. Looking for a something that is street able and works good at the track.

To the OP, from the research I've done so far I think BMF (now sota off road) are one of the lightest 20" wheels. I was planning on going with 20x10 Novakanes with 305/50/20 420's.

Sent from my SM-N920V using Tapatalk

 

[quinton]

They don't have to be 20's I'll go with anything that looks good and are light that can also be daily driven some.

 

[paint94979]

Look into Raceline wheels

 

[CentolaCCSB]

What about PYOs?

 

[Harbin_22]

I have a set of 16x10 ProComp 1069's, can't remember offset, but them and 30x14 cheaters weigh in at 49#'s each. I think the entire setup cost around $1,600 or so.

 

[N2BRK]

Damn Kyle, that is a mean look!

 

[IOWA LLY]

I have that same combo. Never ran them yet though. I'm looking for something that I can drive there and race without a bunch of work. Just for a casual Friday fun night sort of thing.

Sent from my SM-N920V using Tapatalk

 

[quinton]

I like these racelines. Just need to know a weight.

 

[IOWA LLY]

How would these work for the street and strip? No hauling of course. In the 305/35/20 size.

http://www.nittotire.com/race-tires/nt555r-dot-compliant-competition-drag-radial-tire/

 

[quinton]

How would these work for the street and strip? No hauling of course. In the 305/35/20 size.

http://www.nittotire.com/race-tires/nt555r-dot-compliant-competition-drag-radial-tire/

I know someone that uses those for street on his single cab. He likes them and says they work great

 

[dmaxerLLY]

I have a set of 16x10 ProComp 1069's, can't remember offset, but them and 30x14 cheaters weigh in at 49#'s each. I think the entire setup cost around $1,600 or so.

Are you running tubes with those MH cheaters?

 

[paint94979]

I like these racelines. Just need to know a weight.

IIRC around 50 lbs

 

[quinton]

Anyone know a weight on these?

 

[Harbin_22]

Are you running tubes with those MH cheaters?

No.

 

[TheBac]

That's a bit surprising, Harb.

 

[Harbin_22]

They hold air and don't slip so never messed with it. Funk ran his that way for years so figured I would too

 

[quinton]

What offset are y'all running? "0" or "+" ?

 

[SmokeShow]

I think I found where the 20"x10" Raceline Renegade 8 wheels are 25# a piece.

 

[Harbin_22]

I think I found where the 20"x10" Raceline Renegade 8 wheels are 25# a piece.

Not starting an argument, but seriously doubt any 20x10 is that light. My 20x9 bmf's are 30# and that's the lightest 20" wheel I could find