Lift Kit

[Bonestock]

Hello all,

I am currently running a procomp 6" IFS lift drop bracket on my Lmm. When tbars cranked up to achieve the ride height I like and 35" tire clearance the cv axles are at steep angles. What lift kit would allow for this height and a decent cv angle? I was thinking an 8" lift turned down to 6"? Fabtech, Cognito?

 

[TeaBagger2006]

Do you have lift keys? I recently lowered my front end about 2 inches and my cv are near flat, I removed my bumpstops too and it rides much better. My truck sits at 48" from the ground to bottom of the upper part of the fender

 

[Bonestock]

I removed the offset keys and put factory ones in. I have a perfect CV angle right now but would like the truck to sit 2-3" higher.

 

[Chevy1925]

Do you have lift keys? I recently lowered my front end about 2 inches and my cv are near flat, I removed my bumpstops too and it rides much better. My truck sits at 48" from the ground to bottom of the upper part of the fender

copy cat

I removed the offset keys and put factory ones in. I have a perfect CV angle right now but would like the truck to sit 2-3" higher.

buy a cognito 7-9" or CST 6-8" and drop it down all the way. if you buy a fabtech, you will need new UCA ball joints for their control arms right off the bat as they are junk, new shocks as the white bodys are junk, and cut the LCA bumpstop drop bracket 3/4" to keep it riding like it should and keep you from bottoming out too early off road. Im sitting at 6" right now and truck rides like a dream (well will when my new rear shocks finally show up )

 

[Bonestock]

Thanks man!

copy cat



buy a cognito 7-9" or CST 6-8" and drop it down all the way. if you buy a fabtech, you will need new UCA ball joints for their control arms right off the bat as they are junk, new shocks as the white bodys are junk, and cut the LCA bumpstop drop bracket 3/4" to keep it riding like it should and keep you from bottoming out too early off road. Im sitting at 6" right now and truck rides like a dream (well will when my new rear shocks finally show up )