can i run a lbz cp3 as my second cp3 if my other one is lb7?
02bigstrokin New member Sep 9, 2008 882 0 0 Sep 17, 2009 #1 can i run a lbz cp3 as my second cp3 if my other one is lb7?
S S Phinney Active member Aug 15, 2008 4,008 18 28 Quncy, Fl Sep 17, 2009 #3 They will both need the FPRV. Then they will work together.
Ben46a Wannabe puller Sep 4, 2006 275 0 0 41 Waverley, NS, Canada Sep 17, 2009 #4 i ran them for two years mismatched with no issues, before i switched the regulators.
othrgrl Diesel Addiction Owner Mar 10, 2008 2,151 4 38 Wilmington NC www.mydieseladdiction.com Sep 17, 2009 #5 You can mismatch them without any problems. At most you may have to play with the current and pressures at idle to get it to idle smooth.
You can mismatch them without any problems. At most you may have to play with the current and pressures at idle to get it to idle smooth.
sweetdiesel That's better Aug 6, 2006 10,390 0 0 52 Thailand Sep 17, 2009 #6 othrgrl said: You can mismatch them without any problems. At most you may have to play with the current and pressures at idle to get it to idle smooth. Click to expand... x2
othrgrl said: You can mismatch them without any problems. At most you may have to play with the current and pressures at idle to get it to idle smooth. Click to expand... x2
super diesel <<<< Under Pressure May 14, 2007 1,176 0 0 Northern Colorado www.superdieselperformance.com Sep 17, 2009 #7 Or you can just put a stock LB7 reg on the LBZ pump. This will limit it's out put though (not like it will be a prob with duals though) I run the moded LB7 regs for full flow (if needed). No tuning needed with this. Last edited: Sep 17, 2009
Or you can just put a stock LB7 reg on the LBZ pump. This will limit it's out put though (not like it will be a prob with duals though) I run the moded LB7 regs for full flow (if needed). No tuning needed with this.