LMM: Just ordered rims

[Devyl Inu]

Just ordered my rims Eagle Alloy 016's in a 20x10 -21mm offset. Truck will be leveled with a Cognito UCA kit. What tires do you guys think I should go with, a Toyo M/T 33x12.50 or a Nitto Terra Grappler in a 285 or 295? I still have a little over a month before I'm home, so I have some time to decide.

 

[bevi]

they are both good. I have the nittos and i like them alot. wear well and arnt loud while driveing.

 

[diesel53]

How much did those run you? They look nice. And toyo and nitto are both good. Mt's will weigh more but wear very well.

 

[Devyl Inu]

How much did those run you? They look nice. And toyo and nitto are both good. Mt's will weigh more but wear very well.

$960 shipped to my house. Thought it was a pretty good deal, they look practically identical to the BMF's but cost about $500 less.

 

[hondarider552]

285/55/20 or 33 12.50 20.

 

[bigjohn]

Those are sick lookin. Nice choice:thumb:

 

[z79outlaw]

Good looking wheels, I have a 6" Fabtech and I'm rubbing 305's with the torsion bars dropped, although I didnt have much interest in doing the fender mods either.

 

[Devyl Inu]

Good looking wheels, I have a 6" Fabtech and I'm rubbing 305's with the torsion bars dropped, although I didnt have much interest in doing the fender mods either.

There is a lift planned for the future, just don't know how long down the road it will be. Have to take care of other priorties first, thats why it's going to be leveled for now.

 

[crazycrew]

Damn. That's nice as fawk!!

 

[z79outlaw]

There is a lift planned for the future, just don't know how long down the road it will be. Have to take care of other priorties first, thats why it's going to be leveled for now.

No I understand the leveling I just think 33's your going to have to crank the bars or do a good amount of cutting with that offset

 

[Devyl Inu]

No I understand the leveling I just think 33's your going to have to crank the bars or do a good amount of cutting with that offset

Cool, thanks for the advice.

 

[bmos37]

Good looking wheels, I have a 6" Fabtech and I'm rubbing 305's with the torsion bars dropped, although I didnt have much interest in doing the fender mods either.

I run 305's on my truck with just 2 in. Level keys and I have no rub or scrape even on full lock & good sized potholes bumps. Might just be the back spacing you have for the rims.

 

[z79outlaw]

I run 305's on my truck with just 2 in. Level keys and I have no rub or scrape even on full lock & good sized potholes bumps. Might just be the back spacing you have for the rims.

If Its your LLY in the sign I ran 305s on 16x10s with my torsion bolts nearly out LMMs have smaller wheel openings you can get away with a lot on the gmt-800s