Just bought some slicks and ? on PSI.

[DetailsUnlimited]

7000K truck on factory rims and M&H 275/55/16. What is a good starting psi front/rear.
Thx

 

[straightpiperoar]

gaylon lets see some pics

 

[DetailsUnlimited]

John will see them before I do. He's heading up your way Friday to pick them up. Im coming up saturday. Yours are FAT! 390/45/17! How heavy are the 17"s? I'm hoping when the cooler weather gets here to get to the low 12's. 1.6x will get me there.

 

[jpowel29]

I see more fuel and traction in your future...start building that shortblock now:rofl:

 

[paint94979]

Those are drag radials not slicks ... try 40psi up front and 35psi in the rear then go from there

 

[DetailsUnlimited]

Those are drag radials not slicks ... try 40psi up front and 35psi in the rear then go from there

I stand corrected! LOL yep have to put the bfg's to rest! They were good but loosing there touch!

 

[LWATSON]

I'm thinking about getting some bfg's, how'd they do? I'm cutting low to mid 1.7s with worn out Michelins, hoping for a little better.

 

[Iceman56]

Those are drag radials not slicks ... try 40psi up front and 35psi in the rear then go from there

X2 this is how I ran mine and they worked good. Gonna depend on what the truck wieghs a little bit too

 

[DetailsUnlimited]

I'm thinking about getting some bfg's, how'd they do? I'm cutting low to mid 1.7s with worn out Michelins, hoping for a little better.

I was getting 1.6x's with a little bit of tread and now just spinning.

 

[DetailsUnlimited]

X2 this is how I ran mine and they worked good. Gonna depend on what the truck wieghs a little bit too

7220 with me in it.