Still have the factory y bridge and ricks egr delete and wondering what ppl are using that will work. Can a 90 degree out of turbo (4inch to 5) work?
Intake input for a S366 and ricks egr delete tube.
- Thread starter DetailsUnlimited
- Start date
Iirc you can still use the factory turbo mp. When I installed my 366, I just bought the air raid you build it kit. Then built my own intake tube. It's 4" from the filter to the turbo.
Actually you have a good point. I completely forgot about the vband.
OP... check out pat mcrats website. Then go to the turbo install section. There's a good step by step on the 366. And I know that it shows how they used the stock mp with the turbo. He may have used some silicone couplers or something.
You will find the answer to your question there. But for what it's worth, the air raid kit I used is awesome. It's a complete custom setup that you fabricate. Gets rid of the turbo mp all together.
Mine came with the black piece in the pic....attaches via a silicone piece...
Had to trim the end to fit on my S&B intake.
Had to trim the end to fit on my S&B intake.
on my old lbz i had a gt4094, i know its a different turbo. but i used the belt sander and went around my factory mouthiece till it matched the od of the compressor housing and used the factory mouthpiece and clamp, worked great!
I bought a 90* silicone elbow then bought a 4" pipe to attach to the afe intake I had for the.stock turbo...works and looks great.