Where's the best place to send your injector tips to have them done? I need to get some +40's or +60's for my 01.
injector tips
- Thread starter 01Duramax6spd
- Start date
I'll probably do Exergy. And send the whole stick to be flow matched at working pressure... But you can get tips honed through extrudehoned fo like $400
Definitly get the tips flowed with the injectors. Otherwise they will give you fits and wont all flow the same.
80% extrude hones here, balance rates are perfect (+ or - <1), 900+hp, clean idle, 40+ hooks and counting.
what kind of $$$ am i looking at for some 60 over lbz injectors
honed and flow matched using my injectors. all my injectors are<1 so im assuming they are still good
honed and flow matched using my injectors. all my injectors are<1 so im assuming they are still good
