help with lmm dual fueler...

[RichLMM]

been tryin to install the dual fueler kit..andddddd can't get past puttin the T in the return line on cp3 i cut the hose took out a small section install t and everytime the end that goes to cp3 kinks it wont bend and the T sits on top of the hard line right there too i'm gettin a weeeeeeeeeeeeeee bit frustrated here

 

[JD Dave]

I had the same problem. I'll run outside and see what I did to fix it.

 

[JD Dave]

Bad pic but it might help a little. I used extra hose and brought the t where I could see it and just looped the hose around the coolant line back to the hard return line. Hope that helps.

 

[RichLMM]

much appreciated!