Help Please

[NCT]

Ok so i made a few adjustments to a tune i have and it told me to update firmware while trying to program. No big deal but after i did that when i go to load a tune or even read my PCM it stops on Firmware version 2.4.60. I then updated to the new 7.5 version and tried it again still the same thing. this time it sits on 2.4.65. I thought it may of been something stupid so i switched USB ports...nope. My fuse isnt blown and it will power up with it plugged into the pcm. I try it again and i get a Error message that says unregistered interface. I dont understand this at all, i loaded a new tune last week and everything was fine? WTF


17:21:58.062: Scanning for EFILive FlashScan V2 USB
17:21:58.122: Current protocol set to: "ISO 15765 CAN"
17:21:58.172: Interface firmware version: 2.4.60
17:22:03.840: Disconnecting ...
17:22:03.870: Disconnected
17:22:04.401: Scanning for EFILive FlashScan V2 USB
17:22:04.451: Current protocol set to: "ISO 15765 CAN"
17:22:04.501: Interface firmware version: 2.4.60
17:22:05.763: Disconnecting ...
17:22:05.823: Disconnected
17:22:06.354: Scanning for EFILive FlashScan V2 USB
17:22:06.414: Current protocol set to: "ISO 15765 CAN"
17:22:06.474: Interface firmware version: 2.4.60
17:22:16.358: Disconnecting ...
17:22:16.418: Disconnected
17:22:16.949: Scanning for EFILive FlashScan V2 USB
17:22:17.019: Current protocol set to: "ISO 15765 CAN"
17:22:17.069: Interface firmware version: 2.4.60
17:22:17.099: Interface firmware model: FS2
17:22:17.119: Interface firmware version: 2.4.60
17:22:17.139: Interface firmware date: Jun 30, 2007
17:22:17.159: FlashScan serial number: 003616760705
17:22:17.179: FlashScan license number: 003616760705
17:22:17.199: Disconnecting ...
17:22:17.259: Disconnected
17:22:17.790: Scanning for EFILive FlashScan V2 USB
17:22:17.830: Current protocol set to: "ISO 15765 CAN"
17:22:17.890: Interface firmware version: 2.4.60
17:22:54.954: Disconnecting ...
17:22:55.004: Disconnected
17:22:55.544: Scanning for EFILive FlashScan V2 USB
17:22:55.615: Current protocol set to: "ISO 15765 CAN"
17:22:55.665: Interface firmware version: 2.4.60
17:22:55.705: Interface firmware model: FS2
17:22:55.715: Interface firmware version: 2.4.60
17:22:55.735: Interface firmware date: Jun 30, 2007
17:22:55.755: FlashScan serial number: 003616760705
17:22:55.765: FlashScan license number: 003616760705
17:22:55.785: Disconnecting ...
17:22:55.845: Disconnected
17:22:56.376: Scanning for EFILive FlashScan V2 USB
17:22:56.446: Current protocol set to: "ISO 15765 CAN"
17:22:56.506: Interface firmware version: 108.240.24


this shit is really getting on my nerves so can anyone help me please? Sorry for the language but i am very frustrated!!

 

[Diesel Pilot]

I would just go through this thing again to make sure it loaded right.

http://download2.efilive.com/Tutorials/Interactive/How%20to%20Update%20your%20V2%20Firmware.htm

 

[NCT]

i have already done that 3 thousand times

 

[Diesel Pilot]

Contact EFILive.

or maybe you can find the answer on EFIlive.com in the forums

 

[LBZ]

Have you tried going back to the 7.4 version?

I have been waiting for the real update before I download 7.5. From what I last read, it is a "preliminary" release right. Maybe it still has some bugs to work out.