h2 wheels on duramax

[Dennon2009]

i just put h2's on my duramax, and i cant get the center caps to fit on with my lugs...

has anyone else done something different?

i was thinking of maybe using the stock center caps?

 

[metron]

All the ones i've ever seen have the stock chevy or gmc center caps

 

[Vrabel]

stock H2 caps dont work. unless you put a big hole in the center to clear axle housing. Stock NBS caps work well. That's what I used

 

[blk smoke lb7]

I believe if you use the Correct track wheel spacers in the back you can use the hummer caps,i have seen them used on d maxs.

 

[WisconsinHick1]

You can use your stock center caps but you have to trim them down.

 

[RIDMAX]

Stock Chevy/gmc alloy center caps fit without trimming steel wheel center caps need to be trimmed to fit

 

[countrycorey]

Stock NBS caps work well. That's what I used

Me too

 

[duramaxzak]

View attachment 25987


Here is a H2 wheel with the NBS center cap.

 

[countrycorey]

Here is another

 

[Noreaster]

1.5" or 2" wheel spacer on the rear to use the H2 caps

 

[Dennon2009]

thanks guys.. got my stock center caps coming back to me right now.. i appreciate the input.

also i know this might be the wrong location, but im wanting to go ahead and get my front end beefed up.

whats the best thing to do... ball joints, tie rods, etc.?

 

[blk smoke lb7]

I replaced all my steering parts including the drag link pitman and idler arms inner and outer tierods upper and lower balljoints.Which made everything nice and tight and then i installed tierod sleeves and cognito steering braces that should make your front end nice and tight but if your going to 4 wheel drive launch i would suggest lowering the torsion bars some or it could have a very ill effect on you front axels.Oh and use good front end parts either MOOG or GM IMO i have heard MOOG makes the front end parts for GM but i cant confirm this.

 

[Dozerboy]

Some guys get an extra 2 center caps and cut a hole in the one and glue the second one on top it.