Question: Gt 45

[Gmclbz]

Anyone know what a new GT 45 is worth? This one I believe is a 2.6 inducer T4 exhaust flange and ungated. Any help is appreciated.

 

[paint94979]

Anyone know what a new GT 45 is worth? This one I believe is a 2.6 inducer T4 exhaust flange and ungated. Any help is appreciated.

a GT45 with a 2.6 inducer >??? wow arent they a 3.2 inducer?

 

[malibu795]

a GT45 with a 2.6 inducer >??? wow arent they a 3.2 inducer?

unless someone machine a smaller cover they are 80 or 88mm inducers

 

[Gmclbz]

Hmmmm, I'm gonna do some more measuring...and pull some more #'s.

 

[beach_33]

maybe it was bushed down

 

[paint94979]

maybe it was bushed down

Im sure he would have said that a 2.6 to a GT45 would be bad

 

[Gmclbz]

I believe the exhaust housing is a 1.33 and the compressor side is a 66mm, it has a Volvo part# followed by GT 45... It is also 3" out, why it is a 2.6 in I'm not sure... What are the measurements for a t-4 flange? I was thinking it is and now I'm not sure.

 

[Idaho CTD]

It's one of the older GT45 thrust bearing turbo's from a OEM application. They were called 4594's. 94mm exducer and about a 67mm inducer.

 

[malibu795]

It's one of the older GT45 thrust bearing turbo's from a OEM application. They were called 4594's. 94mm exducer and about a 67mm inducer.

 

[Gmclbz]

Ah, so is it worth anything?

 

[paint94979]

Ah, so is it worth anything?

Probably not, since that isn't really a popular turbo size combination for our trucks.

 

[Gmclbz]

Probably not, since that isn't really a popular turbo size combination for our trucks.

It would figure...

 

[paint94979]

It would figure...

You might be able to sell it on ebay?

 

[Gmclbz]

You might be able to sell it on ebay?

True

 

[racinmike77]

might make a good 2.6 puller turbo

 

[Gmclbz]

might make a good 2.6 puller turbo

It would if the exhaust housing was a tad smaller... I'm not sure what to do with it. It is brand new, someone make me an offer.

 

[DuramaxPowered]

You might want to check and see if you can put a different compressor wheel and cover on it...........

 

[emiller3]

It's one of the older GT45 thrust bearing turbo's from a OEM application. They were called 4594's. 94mm exducer and about a 67mm inducer.

So would the gt4508 would be a better choice with a 80.8mm in and 108mm exd.Maybe in a twin setup with a 68mm.

 

[Gmclbz]

You might want to check and see if you can put a different compressor wheel and cover on it...........

I'm sure you can, but I still think the exhaust housing is too big...

 

[TrentNell]

So would the gt4508 would be a better choice with a 80.8mm in and 108mm exd.Maybe in a twin setup with a 68mm.

4718