Gauge cluster

[Dirtymax03]

In my Gauge cluster the p r n d 3 2 1 doesn't lite up makes it hard for the wife 2 drive. Does anyone Have any ideas.

thanks in advanced

 

[TheBac]

If you are on the Place, a member there figured out what was causing those failures.

http://www.dieselplace.com/forum/showthread.php?t=426953&highlight=cluster

 

[Whitetail Addict]

Mine has been that way for years. Think of it as an anti-theft device.

The way I understand it, there is a relay that goes bad that control the prn indicator.

 

[Dirtymax03]

If you are on the Place, a member there figured out what was causing those failures.

http://www.dieselplace.com/forum/showthread.php?t=426953&highlight=cluster

Thanks found it now 2 c if thats the problem

 

[red1977]

Most likely it cause a peace of solder came loose on the park drive I have to leave this morning for my sons race but when I get home I will go into further detail I have fixed plenty of them.

 

[red1977]

Thanks found it now 2 c if thats the problem

Look at this link. I 99% sure this is your problem I have fixed plenty that this is there problem.

http://mrfixit.webnode.com/step-by-step-instruction/